VSS ® CB33 High Definition Clay Bar
Micro particles dirt such as traffic film (e.g. dirt/soil/sands particles), pollutant (e.g. acid rain, exhaust gas emission), and contamination mark (e.g. insects, bird drops, and tree saps) are most caused of paint surface dull and fading luster. The micro-particles dirt are hard, sharp and harmful to the paint surface and clear coat where may create swirl mark and scratches. VSS CB33 High Definition Detailing Clay is high performance detailing clay bar where helps to pick up and remove trapped micro-particles on the paint surface and clear coat as a surface preparation before detailing process.
Features
VSS CB33 High Definition Detailing Clay Bar pick up and remove trapped micro-particles on the paint surface and clear coat as a surface preparation before detailing process. VSS CB33 Detailing Clay Bar works well on paint surface, clear coat and ceramic coat.
VSS CB33 High Definition Detailing Clay Bar pick up and remove trapped micro-particles on the paint surface and clear coat as a surface preparation before detailing process. VSS CB33 Detailing Clay Bar works well on paint surface, clear coat and ceramic coat.
Application Area
- PDI-Centre
- Professional detailing
- Showroom
- Exhibition
- Hobbyist
- DIY
Usage Direction
Wash and clean thoroughly the vehicle exterior with VSS SP-10 High Definition Pre-Wash and VSS SP-20 High Definition Car Shampoo. Cut 1/3 portion from the whole clay bar and flatten by hand to be around 2 to 4 mm thickness and about to form slightly round shape. Prepare a bottle of clean water with sprayer where will be used as surface lubrication during application. Spray clay bar and designated area with water before claying. Slide back and forth with gentle pressure. Paint surface should be smooth and free from particles when it apply correctly. When the clay start to stick on the paint surface, spray again with water to give a smooth lubrication during application. The unused area of the clay bar can be use again by fold it into two and flatten it again as in first method. Repeat process until the whole designated area are completely clayed and the paint surface are smoother and free from micro-particles. Buff clean with micro-fiber buffing towel for completion.
Wash and clean thoroughly the vehicle exterior with VSS SP-10 High Definition Pre-Wash and VSS SP-20 High Definition Car Shampoo. Cut 1/3 portion from the whole clay bar and flatten by hand to be around 2 to 4 mm thickness and about to form slightly round shape. Prepare a bottle of clean water with sprayer where will be used as surface lubrication during application. Spray clay bar and designated area with water before claying. Slide back and forth with gentle pressure. Paint surface should be smooth and free from particles when it apply correctly. When the clay start to stick on the paint surface, spray again with water to give a smooth lubrication during application. The unused area of the clay bar can be use again by fold it into two and flatten it again as in first method. Repeat process until the whole designated area are completely clayed and the paint surface are smoother and free from micro-particles. Buff clean with micro-fiber buffing towel for completion.
